112865.4USD
105.8USD
2.78USD
0.19USD
3404.2USD
19.28USD
739.08USD
159.33USD
0.26USD
0.08USD
0.25USD
Whatsminer H3 SD card Program-20220422_new 神马H3卡刷系统-20220422
1. Applicable mode1.1 M3x, M2x series;2. Details2.1 H3 control board card brush system file, including instructions and burning software
2023-08-31 12:45
1858
0
0
10
Whatsminer H616 controller program-20220729_神马H616控制板卡刷-20220729
1. After that you must upgrade the latest firmware, if the miner is not upgraded, there would be error code;2. Applicable to M5x and M3x
2023-08-31 12:40
1207
0
0
10
Whatsminer H6os SD Card Program-20220422 _new 神马H6os卡刷系统-20220422
1. After that you must upgrade the latest firmware, if the miner is not upgraded, there would be error code;2. Applicable to M5x, M3x an
2023-08-31 12:31
1170
0
0
10
Whatsminer-M2x-all-20220919.15_NEW
1. Applicable mode1.1 M21S, M20S, M21,etc;1.2 High mode can not be supported;1.3 Teaching video: https://youtu.be/L-gpDzD9YCU2. New vers
2023-08-31 12:25
1804
0
1
10
Whatsminer-M5x&M3x-all-20230818.15
1. Applicable mode1.1 M56, M53, M50, M31S, M30S, M32 etc.;1.2 High mode can be only supported, also require the input voltage over than
2023-08-31 12:22
1726
0
1
10
2022 Minerfixes - All Rights Reserved