76369.78USD
60.51USD
1.59USD
0.11USD
2270.88USD
9.7USD
757.61USD
97.84USD
0.1USD
0.03USD
0.09USD
Post Q&A
HashBoard PSU Control board Overclock Downclock Liquid cooling Mine construction Operation and maintenance
Z11 hashboard without 3.3V
@Ada
2023-07-08 04:39
1040
  1. Check if there is any oxidation on the resistors and capacitors. You can compare with a working board for reference.
  2. Check the power management ICs one by one. Also check the IO port as well. Verify if the voltage on the "EN" (enable) pin is normal.
  3. Measure if there are any short circuits in the peripheral capacitors and the resistors are functioning properly.
  4. If the issue persists, try replacing the power management IC. The IC input should be 12V.
0
Sign in You can only post comments after logging in.
no comments data
Active Users
@Ada
43 participate in
@Sunny Anusi
37 participate in
@Yoda
34 participate in
@BTC-Miner
18 participate in
@Bogard
3 participate in
@jread352
2 participate in

No. 199, Zhaojuesi South Rd, Chenghua District, Chengdu, Sichuan, China

No.14, Jian'an Rd, Bao An District, ShenZhen, GuangDong, China

+86 15390421113

minerfixesofficial@gmail.com

About Us Contact Us FAQ News
Privacy Policy Terms & Conditions
2022 Minerfixes - All Rights Reserved